Yesterday I spent time with sheep and weaving and ecoprinting and computer. I did more of the same today but didn’t take any weaving photos.
I changed the fence today to move the sheep into a separate paddock. You can’t tell from this photo but there are 8 paddocks that run north-south on this half of the property. There are 3-wire electric fences that keep the sheep in and I change the net fences at the two ends to open or close paddocks. Notice the hot-air balloons. It’s that time of year. There are four in this photo.
This looks like a lot of grass. It is a lot of grass, but it’s not the desirable grass and forbs I’d like. There is a lot of bermuda grass and dallisgrass. Those two take over this time of year. The sheep don’t like them when they get too coarse and head out. Then they go dormant in the winter and choke out the winter/spring annuals that I’d like to see. At least it’s green right now. That’s because we irrigate–there is no summer rain here.
Close up of one of the balloons. Who remembers Rusty? Blog post from 2011. Rusty even had his own blog for several years. I just got distracted and read back through some of it. Rusty was a pretty good writer and I enjoyed reading through his posts just now. I wonder if I could get Ginny to write a blog.
Anyway, about Rusty. He was afraid of these balloons. During “balloon season” he wouldn’t leave the house first thing in the morning. He knew that they’d be gone by mid-morning and then he would go out. Ginny doesn’t mind the balloons, but she is sure gun-shy and that’s a problem with all the recreational shooting around here.
Speaking of things in the sky, this is the third time there has been a helicopter spraying the tomato field across the road.
Before I went to the house after this morning’s chores I wanted to unroll the ecoprints from yesterday (see yesterday’s blog post). I have taken over this work table in the garage. The ecoprints are still rolled up on the right of the table. This is a look at the other projects I have going on–getting these skulls in some shape that I can sell them.
While I was working on the ecoprint scarves this morning I had a pot cooking with a couple of skulls to see if I could get them cleaned up better.
Here is a pair of square scarves. The photos in yesterday’s post show scarves with leaves or flowers in place. I put a second scarf on top of each of those and then roll them around a PVC pipe to steam. These photos show the pairs of scarves after unrolling. This pair has cosmos leaves and flowers. I am always fascinated by the different looks on the two scarves.
This one is all cannabis leaves (supplied by a friend). These don’t have that classic look of the ones below because by the time I got to this, the remaining leaves had started to fold up and at that point it is very tedious to spread them out again, especially with all these small ones.
Cannabis leaves in the more classic look.
Another set of cannabis leaves with a close-up below.
Some plants print on one scarf and create a resist on the other. These are printing on both scarves.
No, I am not selling cannabis. These are purple hollyhocks and cosmos flowers that I have added to my website and will have at Lambtown.
Tomorrow is a Farm Day and we’re setting up breeding groups! I need to look at my list one ore time.
I don’t have photos of everything I do during the day. Standing at the computer for hours doesn’t make for very exciting photos.
Now that the only ewe lambs left are those that I’m keeping, I wanted to halter break them. I don’t expect them to lead like a horse, but I like to be able to tie them to a fence without them panicking. Also, a couple of these will be going to the Lambtown sheep show at the beginning of October. It will make it easier for my Farm Club crew if the lambs are at least somewhat halter broke.
There is a bit too much giant zucchini. Too bad zucchini isn’t a dye plant. But at least I can feed the extra to someone.
I have a couple of articles scheduled for Handwoven Magazine for next spring. The deadlines are approaching and I need to finish some more weaving so that I have photos for one article and the project to send for another. This is Clasped Warp, a technique usually done on a rigid heddle loom. I am adapting it to use on a multi-shaft loom.
I have some custom projects in progress on the AVL loom in the shop. I have woven two Year to Remember blankets on this warp. Now I need to finish the warp with other blankets. The yarn above is all naturally dyed and I want to use that for a blanket that I can post on the new Fibershed Market site (not available yet). The yarn is dyed with mushroom (dark gray), hollyhock (blue-green), indigo (blue), weld, (yellow), cosmos (orange), and madder (rose).
Here is how it looks on the loom.
A friend dropped off more plant material to use for ecoprinting scarves and I wanted to get to it right away while the leaves were fresh. I have learned something about working with cannabis leaves–they start to fold up quickly. It’s tedious to arrange them the way I want them to look. They have a property of differential friction–the little hairs on the leaves allow them to slide one way on the fabric, but not the other. There is a second scarf that goes on top of these and it’s important to have the leaves spread out as the second scarf is spread across the first. Each scarf is wet with different solutions and they begin to react quickly upon contact.
I am trying out some square scarves as well. This one is printed with cosmos flowers and leaves.
These scarves use maple and madder leaves (left) and cannabis and indigo leaves (right). I rolled all of these up on PVC pipes and they steamed for 90 minutes. They are cooling in the pot and taturhe unveiling will happen tomorrow.
I should be weaving. I planned to listen to a new book and weave today. This is what I did instead.
Anytime you have a sheep in for medical care it takes a little more time. Hazel spent Thursday night at UCD VMTH (Should I to spell it out? U.C. Davis, Veterinary Medicine Teaching Hospital). I took her in because the night before and Thursday morning she looked like the photo below.
I had texted the veterinarian I usually use and she thought that Hazel should go in. She never acted sick other than not wanting to eat because her mouth was so sore. We still don’t have a diagnosis because we’re waiting on blood tests. No matter which, if any, come back positive, the care would be the same. Isolation and TLC. Hazel is not happy about being locked in. I put a couple of sheep across the aisle from her so that she’s not totally alone. She is getting meloxicam and a slurry of something that includes lidocaine to coat her mouth to reduce the pain so she’ll eat.
After cleaning the barn and dealing with other sheep I faced the two skirting tables holding skulls in various states of cleaning. I am not very good at this but there is a value to the skulls and I need to make it work.
I had planned to boil some of them and see if I could get them cleaner that way. I brought two up to the garage and started a pot.
After I got that started (and started the timer on my phone so I wouldn’t forget) I dumped the wheelbarrow load in the dye garden where I had cut out the old dead hollyhock stalks.
This is a different view of the cosmos that you can see in the photo where the hollyhocks were. I took this after I picked cosmos today…or maybe while I was in the middle of it. It still seems like there are a lot, but not as many as earlier. Notice the sunflower that came up from last year’s seeds. It’s hard to tell in this photo but it is massive. There are two branches at the bottom. One is leaning left and the top is bent over. You can barely make out the head of the sunflower just above where you see the gravel driveway in the photo. The other fell over very early in the season and that is what looks like a big branch coming toward me in the lower half of the photo. If you look to the right of that between the close cosmos and the big stand of cosmos you can pick out smaller sunflower heads. Those are growing off that big branch that goes all the way to the right side of the photo. I took this photo to show the hollyhock that was planted just behind the row of cosmos. It is now flowering but you can only see if if you know where to look right at the base of that leaning sunflower. This was a lot of writing to explain a not very interesting photo. This is one of my dye garden plots.
One of my goals today was to photograph more products for my website and for the website that will be for Fibershed producers nationwide. (!!) I’ve been weighing fresh cosmos as I pick the flowers and after they are dried so I can sell dried flowers with a recommendation of how much you need to dye a give amount of yarn. I have dyed enough yarn with these flowers now to know that you can start with a 1:1 ratio (weight of fresh flowers to yarn) and have plenty of color left in the dye pot for more. I wanted to do another batch after I found my gram scale. I don’t want to try and measure smaller quantities in tenths of ounces. At that 1:1 ratio this should dye 4 ounces of yarn (oops, I just recalculated and it should be 113.4 gm.
I have been keeping a spread sheet and have seen that the weight of dry cosmos is .19 that of fresh cosmos. So here is enough dried flowers to dye 4 ounces of yarn. I need to continue to take photos of the process to add these to the two websites.
I set up two dye pots and turned them on low figuring that I could keep track of those while I took more photos.
In the meantime I got distracted by this interesting leaf! Great weaving pattern and colors!
Moving on to buttons. I need to update what I have on my website and add them to the new website.
The template for the sale products on my website uses horizontal photos. If I use a square photo it is cropped. That is why some of the weaving tools, looms, etc are not the way they should be –I used photos provided by Schacht and Ashford. But the new website, as well as that of the Artery, which I’m helping with, needs square photos. So I am taking two sets of photos or taking the horizontal photos with enough room around them that I can also crop to square. Very annoying. I know I could change the template I use on the Squarespace platform but do I have the energy to figure it out without having to change all the other stuff I have on there? Not right now. Maybe never.
My goal is to get these listed on my website before I send this blog post so that I can include a link, but that may not happen tonight. [I am proof-reading now and know that I won’t get to that. If you’re interested in some check back or see me at Lambtown next month.]
We’re trying to have a consistent background for photos and I’m using this manila paper. (Want to know about Manila paper? Read this blog post.)
More distractions. These sheep were looking through the fence near where I’m taking photos. I really need to figure out the breeding line-up. This is a topic for another post (as are most of the topics in this one). But this introduces one of the contenders for breeding in two weeks. This should be another post because I’ll explain why I don’t have any adult 4-horn rams to use now and have only a couple of choices here and it’s really too early to know for sure. Back to photos.
At the State Fair I had a display of natural dyeing. (See how it looked in this blog post.) It’s time to do something with those yarns. I may weave with some but I wanted photos for yet another blog post and I may try to sell them online. These yarns are the base yarns I used for the display. That is gray Jacob yarn spun spun at Valley Oak Mill, Jacob britch yarn that I don’t have listed on the website, 4 ounce skeins of TR yarn spun at the Mendocino Mill, and 1 ounce skeins of TR yarn spun in Wyoming. I’d better update those listings before I post this. They all went in a variety of natural dyes. I’m only showing a little of that here.
This is the oxalis dye pot. I decided that if I want to sell these as groups it makes more sense to sell the same yarn together instead of the same color. If you try to use all those yarns in one project you’ll have challenges. The britch wool has little elasticity and the Timm Ranch wool has lots. It’s better to use like yarns together and mix up the colors.
So this is the batch of gray yarns that went in all the dye pots. I’ll put these online but it won’t be tonight.
Back to what was going on in the kitchen. This is the previous batch of yarn from dyeing 4 ounces of fresh cosmos flowers–a gray skein and a white skein were the first 4 ounces in the dye pot. I used 4 ounces more the next day. I dyed a two ounce skein after that in the same pot.
This seems like a random change. There are two freezers in the garage and last week we found them leaking. The power strip they were using failed. Needless to say that was a mess and that’s why we cooked a turkey 3 days ago and are still eating it. Fortunately there was a lot of random stuff in the freezers–yarn that had been there for years to kill any potential bugs, parts of butchered sheep that Dan hadn’t figured out how to cook and that had been there a long time, etc. So most was thrown away. I salvaged my pomegranate juice and the turkey which had not completely thawed. Today I cleaned the freezer while keeping an eye on the pot with the skulls. I put some containers of water in there to use for indigo dyeing tomorrow.
At this point, about 12:30, I came to the house for breakfast. I added yarn to those cosmos dyepots and worked on the computer while paying attention to them.
This afternoon I took the skulls out of the pot to see how well they were cleaned. I spent a lot of time picking pieces off. It is interesting to see what a fused horn ram skull is like. You can see the fusing of the outer part of the horn on this side.
There are three horns on this side.
I’ve been reading up on how to do a better job with the skulls. The next step after cleaning off the stuff that isn’t bone is to degrease. This is how I left the skulls–in Dawn liquid.
Meridian Jacobs' Blog 